Home
Product Directory
Auto, Motorcycle Parts & Accessories
Motorcycle Parts & Accessories
Motorcycle Engine
Tach Hour Meter for Motorcycle ATV Snowmobile Boat Stroke Gas Engine Generator (lp-01)
| Payment Terms: | T/T |
|---|
Similar Items
Loading...
You May Like
Loading...
Product Description
Company Info
Product Description
Engine Tachometer, hour meter, timer
A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable).
Hour meter
Used for Marine, ATV, Motorcycle, Snowmobile
Track the Service Life of Your Vehicle-oil changes, valve, adjustments, spark plugs, etc^
Easy Installation-peel & stick, no wiring necessary, or attach with enclosed hardware.
No Battery Require-connects to spark plug wire.
Works on Any Gas Engine.
We have 3 colors for this item: Black, blue, orange, color will be sent randomly, pls leave us message if you have the special color request.
Installation Method:
1. Wrap the included pick-up wire around the spark plug wire five times. Start wrapping the pick-up wire about 4cm from the end of spark plug boot. Use the included zip tie to secure the pick-up wire wrapping as shown in the photo right.
2. Before continuing the installation, insert the pick-up wire Into the rear of the meter. Start the motor to make sure the meter is picking up the ignition signal. If it is, this will activate the timer on the meter and the icon on the left of the LCD will flash. You'll have to wait at least 6 minutes to increase the timer display(1/10th of an hour). If it is not picking up the ignition signal, slide the pick-up wrap closer to the spark plug boot.
3.1f the meter is successfully picking up the spark signal, run and zip tie the pick-up along one of the throttle cables. Make sure the pick-up wire can not make contact with the engine. Also, make sure you leave enough (about 8 cm) so removing the spark plug wire is possible. Keep in mind the general location of final mounting location on the frame spare.
4. Securing Method:
A. Drilling into your frame with 2.5mm socket, then secure it to the frame coming with two pick-up screws.
B. Using padded double-sided tape on the backside of the meter and secured it to the frame spar with zip ties. That's all there is to the installation. Now you're set to accurately track your maintenance. Don't forget to record the metered time when performing maintenance.
Quick Facts
Compatibility: All motorcycle models (anything with a spark plug really should work)
Hardware Included: Meter, pick-up wire, two screws
Tools Required: 2. Smm socket to remove shroud, wire cutters.
A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable).
Hour meter
Used for Marine, ATV, Motorcycle, Snowmobile
Track the Service Life of Your Vehicle-oil changes, valve, adjustments, spark plugs, etc^
Easy Installation-peel & stick, no wiring necessary, or attach with enclosed hardware.
No Battery Require-connects to spark plug wire.
Works on Any Gas Engine.
We have 3 colors for this item: Black, blue, orange, color will be sent randomly, pls leave us message if you have the special color request.
Installation Method:
1. Wrap the included pick-up wire around the spark plug wire five times. Start wrapping the pick-up wire about 4cm from the end of spark plug boot. Use the included zip tie to secure the pick-up wire wrapping as shown in the photo right.
2. Before continuing the installation, insert the pick-up wire Into the rear of the meter. Start the motor to make sure the meter is picking up the ignition signal. If it is, this will activate the timer on the meter and the icon on the left of the LCD will flash. You'll have to wait at least 6 minutes to increase the timer display(1/10th of an hour). If it is not picking up the ignition signal, slide the pick-up wrap closer to the spark plug boot.
3.1f the meter is successfully picking up the spark signal, run and zip tie the pick-up along one of the throttle cables. Make sure the pick-up wire can not make contact with the engine. Also, make sure you leave enough (about 8 cm) so removing the spark plug wire is possible. Keep in mind the general location of final mounting location on the frame spare.
4. Securing Method:
A. Drilling into your frame with 2.5mm socket, then secure it to the frame coming with two pick-up screws.
B. Using padded double-sided tape on the backside of the meter and secured it to the frame spar with zip ties. That's all there is to the installation. Now you're set to accurately track your maintenance. Don't forget to record the metered time when performing maintenance.
Quick Facts
Compatibility: All motorcycle models (anything with a spark plug really should work)
Hardware Included: Meter, pick-up wire, two screws
Tools Required: 2. Smm socket to remove shroud, wire cutters.
Address:
Room 2001, New World Plaza, No. 1870, Bin Sheng Road, Bin Jiang National High Tech Industry Park, Hangzhou, Zhejiang, China
Business Type:
Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories
Main Products:
Motorcycle Stands, CNC Parts, Motorcycle Parts, Tyre Warmer, Timer, Lever, Fuel Cap, Rear Set, Foot Peg, Frame Slider
Company Introduction:
We sincerely hope establishing long and friendly business relations with clients from all over the world.Our goal is not just providing product, but also providing a complete solution including product design, tooling, fabrication and service for our customers to achieve their upmost satisfaction.
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.To perfect our service, we provide the products with the best quality at the reasonable price.
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.To perfect our service, we provide the products with the best quality at the reasonable price.
){kind=link}